Hach-Lange DR 3800 Additional Software LINK2SC - Manual (Page 28)

16
Operation
3.3 Compare different data from the sc1000
3.3.1 Display different parameters in one graph
Different parameters can be displayed in one graph to show the
influence and/or dependencies.
To display different parameters in one graph:
1. Insert the SD SanDisk card in the USB adapter and connect the
USB adapter to the USB interface (type A) on the DR 3800
(Refer to
Figure 1 on page 5 ).
2. Press Recall Data in the Main Menu.
3. Press External Data in the Recall Data menu.
A list of the parameters (for example NH4D) is displayed.
4. Select a parameter and confirm with OK.