Hach-Lange BUHLER 1027, 1029, 2000 Portable Sampler - Manual (Page 16)

16
Installation
connected cable, the plug and socket are much more susceptible to liquid and
dust penetration. The operator must sufficiently protect the plug and outlet against
liquid and dust penetration in accordance with local safety regulations. If the
instrument is to be used outdoors, it must be connected to a suitable outlet with a
protection type of at least IP44 (splash protection).
3.2.1 Electrical installation
3.2.1.1 Prepare the electrical installation
To connect the equipment to the mains, see Figure 36 Model 2000 with Y cable and
charger on page 31 .
In battery mode In mains power mode
1027 – No preparation required
1029 No preparation required
Connect the optional charger to the charge socket on the left-hand
side.
2000 No preparation required Connect the Y cable as shown in Figure 12 .
Figure 12 Connect the Y cable (2000)
4
2
3
1