Hach-Lange 2100Q and 2100Qis User Manual - Manual (Page 25)

Error/Warning Description Solution
Please disconnect the
USB cable from your
computer. Data storage does not
respond while connected
to the meter and the
computer. Disconnect the USB
cable from the meter and
try sending data again.
USB module memory
full. Delete data and try
again. Data storage is full. 1. Connect USB/power
module to the computer.
2. Download the stored
data to the computer.
3. Delete Data Log on
the module.
Delete Last Reading
Failed! Error in the data storage. Turn the meter off and
on. If the error message
still occurs, contact
technical support.
Delete Data Log failed!
Can't read data set!
Can't store data!
Can't store to the
Reading Log!
Can't store to the Verify
Cal Log!
Error storing data!
Error reading data!
Replacement parts and accessories
Replacement parts
Description Quantity Item no.
StablCal ampule calibration kit 1 2971205
10 NTU verification standard 100 mL 2961701
Silicone Oil 15 mL 126936
Replacement parts (continued)
Description Quantity Item no.
Insert, molded bottom 1 2971507
Sample cell oiling cloth 1 4707600
1" glass sample cell (10 ml ) w/cap (Turb) pkg/6 2434706
Carrying case (includes insert) 1 2971500
Battery set, AA alkaline batteries pkg/4 1938004
Lamp assy 1 4653900
Blank module 1 LZV797
Rubber foot set 1 LZV821
Lamp cover (includes screws) 1 LZV822
Battery cover (includes 2 feet) 1 LZV823
Module cover 1 LZV824
Connector cover for USB/power module 1 LZV825
Connector cover for power module 1 LZV826
Lid (includes magnet) 1 LZV827
Accessories
Description Quantity Item no.
USB/power module (includes: universal
power supply, USB cable, instruction
sheet)
1 LZV813.99.00001 1
Power module (includes: universal power
supply, instruction sheet)
1 LZV804.99.00001 1
USB module with USB cable (2x) 1 LZV949.99.00001 1
StablCal 0.1 NTU Standard 100 mL 2723342
English 23