INSTEON HouseLinc Manual - Manual (Page 21)

Page 21 of 28 HouseLinc - Rev: 2/14/2013 5:03 PM
NOTE: The software will find this device again if linked to from any other devices
Swap Device
If you are replacing (or upgrading) a device, you can use this feature
to:
 Copy links from one device to the other
 Update the events / timers to work with the new device
 Delete links to and from the device being replaced
1) Be sure you have added the device. See Adding Devices Using Auto link or Adding Devices
Manually Using Their INSTEON IDs .
2) Right-click on the device being replaced in the Devices list and select “Swap”
3) Click Next to begin the Swap Device wizard
4) Read the “Important Note” and click “Next”
5) Check the box next to the device
you’ll like to copy the links to and
click “Next”
HouseLinc will run a basic
compatibility test between the
new device and the device
being replaced
7) Once compatibility has been
determined, click “Next”