INSTEON HouseLinc Manual - Manual (Page 8)

Page 8 of 28 HouseLinc - Rev: 2/14/2013 5:03 PM
3) To set the devices name, location and
other settings, click on your device in
the Devices list and select the
Properties tab
4) Click on each new device in the
device list and enter its room and any
other information you wish to record
at this time. Note: it is highly
recommended that you at organize
your devices by room.
INSTEON Device Properties
The Properties tab provides a quick view into local settings, name, location and notes as well as offering
a direct control interface.
An example screenshot for a SwitchLinc Dimmer:
General
Device
Information
Direct Control
Local Settings