INSTEON LED Bulb 2672-222 Manual Rev.1.0-2.9 - Manual (Page 19)

19
Always-On Wiring
4
6 7
5
Mount the Dimmer Switch into the
junction box with the LED bar on the
left and turn power on to the switch at
the circuit breaker panel.
Test your switch by tapping the paddle
to turn On and Off. Your LED Bulb will
not change but the status lights on the
switch will.
Your switch will now control
your LED Bulb
Unscrew and reinsert your LED Bulb
for a moment and reinsert. Your LED
Bulb will double-beep.
To link your switch to the LED Bulb,
press and hold the set button until the
device beeps.
ON