INSTEON Hidden Door Sensor (2845-222) Manual - Manual (Page 13)

13
Already Installed Linking
Link Hidden Door Sensor without removing from your door frame
If Your Door Is Already Open If Your Door Is Closed
? ?
1
OR
Open your door and press and release
Door Sensor’s contact plunger twice. After
a pause, Door Sensor will beep.
Once in linking mode, you can open
or close the door without exiting
linking mode.
You can cycle between Linking and
Unlinking by repeating the Five-Tap
Linking process.
Press and release Door Sensor’s contact
plunger twice then hold the contact
plunger until Door Sensor beeps.
Linking
Unlinking
Exit