INTELLINET NETWORK 560559 16 Ports Gigabit + 2 Gigabit SFP PoE+ Web Management Ethernet Switch User Manual - Manual (Page 10)

10
User Account
To set up the system password in the Web browser:
Web Smart switch interface
1. Click System, then User Account.
2. Enter the new user name.
3. Enter the new password.
4. Enter the new password again to confirm your input.
5. Click Save.
Figure 7: User Account Setting
Port Setting
To specify options for enabling auto-negotiation or manually setting the speed and duplex mode, or for enabling
flow control.
To set up port configuration in the Web browser:
1. Click System, Port Setting.
2. Select one or more ports to configure.
3. Make any required changes to the connection settings.
4. Click Apply.