INTELLINET NETWORK 560559 16 Ports Gigabit + 2 Gigabit SFP PoE+ Web Management Ethernet Switch User Manual - Manual (Page 19)

19
VLAN Stacking Setting
After configuring port members for stacking VLANs on the switch, the ports connected to a service provider
network need to be enabled as double-tagged ports. Also, the Tag Protocol Identifier (TPID) value must be set for
the double-tagged ports to identify 802.1Q tagged frames.
Web Smart switch interface
To manage stacking VLAN port settings,
1. Click Configuration, VLAN Stacking, S-VLAN Setting.
2. Specify the Tag Protocol ID number.
3. Set the stacking PVID for service provider ports and configure them as “Enabled.”
4. Click Apply.
Figure 15: VLAN Stacking Setting