IQinVision 7 Series - Manual (Page 6)

6
5. The “Live” page will be displayed through the default browser (IE
recommended). It is also possible to open Internet Explorer and enter the IP
address of the IQeye camera in the address field of the browser. If prompted,
install the Active X control (Figure 8).
Figure 8
6. To perform further configuration of the camera click on the “Setup” tab.
NOTE: The default user name is “root” and the default password is “system”.
7. To complete focusing using the one-touch focus method go to the Setup >
Focus tab (Figure 9).
Figure 9
8. Set the iris on the lens to the ‘Open’ position then lock it down with the iris set
screw.
9. If the back focus has been set before using the camera, click the “restore
defaults” button on the Focus tab to reset the back focus adjustment.
10. Use the Varifocal adjustment on the lens to set the field-of-view, then lock the
Varifocal adjustment set screw.