IQinVision 7 Series - Manual (Page 7)

7
11. Focus the lens using adjustment on the lens, then lock the focus adjustment
set screw.
NOTE: The focus adjustment should be close to ensure the one-touch focus adjustment
can be completed.
The following image (Figure 10) is an example of an image not focused enough to
ensure a remote one-touch focus can be completed.
Figure 10
The following image (Figure 11) is an example of an image focused enough to
ensure a remote one-touch focus can be completed.
Figure 11
12. On the Focus tab click the one-touch focus button to focus the video image
(Figure 12).
Figure 12