IQinVision Alliance-pro Series - Manual (Page 8)

8
8 Install Interior Mounting Plate
a. Position the supplied mounting template on the surface in the location where
the camera will be installed. Trace and drill the mounting holes and the cable
pass through hole, as indicated.
b. Using the supplied or equivalent hardware, install the mounting plate to the
intended surface.
c. Pull cabling through the pass-through hole.
NOTE: When installing the Alliance-pro to a ceiling tile, use hardware designed to secure the camera
assembly to such a surface and ensure the ceiling tile being mounted is secure.
In addition, follow local regulations and laws which may have specific requirements governing the
installation of security equipment on a ceiling tile surface. IQinVision strongly recommends the use
of a ceiling tile brace and other mounting hardware designed to secure the Alliance-pro to the ceiling
frame infrastructure.
9 Connect Camera
Power-over-Ethernet, Direct Power, I/O, and continuous analog video out
connections are made on the top of the camera module. See Figure 9.1.
Figure 9.1