IQinVision Alliance-mini Dome Electrical Gang Box Adapter - Manual (Page 2)

3 Installation
1. Route the Ethernet cable through the opening in the Electrical Gang Box Adapter, and attach the adapter as
shown in Figure 2 using the two supplied Flat Head machine screws.
2. Route the Ethernet cable through the cable pass through in the camera base plate. Attach the Alliance-mini
camera to the adapter as shown Figure 3 with the two Pan Head machine screws.
3. After the field-of-view and focus are completed, attach the dome cover and tighten the dome cover to the camera
base using the supplied Torx T-10 security wrench supplied with the Alliance-mini dome camera.
901-0264 Rev A
FIGURE 2
FIGURE 3
FIGURE 4