King Technology FROG Leap Anti-Bac Mineral Pac - Manual (Page 2)

For a 90 day algae protection
guarantee, insert FROG Leap
ALL-OUT into FROG Leap Anti-
Bac Mineral Pac in FROG Leap
Infuzer or POOL FROG Cycler
(see page 4 for directions).
2
Start-up and Operation -
FROG Leap Anti-Bac Mineral Pac now with 25% More Water Polishers for easier start up.
Add a stabilizer or
conditioner to the pool
at the beginning of the
season if the stabilizer
level is below 20 ppm. This
will prevent chlorine burn
off. Follow manufacturer’s
directions carefully.
Install an FROG Leap Anti-
Bac Mineral Pac into the
FROG Leap Infuzer or POOL
FROG Cycler (see page 3 for
directions).
REPLACE THE FROG LEAP
ANTI-BAC MINERAL PAC EVERY
6 MONTHS OR AFTER ONE
POOL SEASON WHICHEVER IS
SHORTER. Replace cap and
run with FROG Leap Anti-Bac
Mineral Pac inserted, for 10
minutes at Setting 5.
SETTING CONTROL DIAL Set control dial by matching up the parameters of your pool on the charts below. THIS IS A STARTING POINT ONLY and may
need to be adjusted to fit your individual pool needs. See #8 for directions.
When chlorine reading is down to
1.0 ppm, which may take a few
days, insert FROG Leap Torpedo
Pac (see page 4 for directions). Create a chlorine residual
with FROG Leap Reveille or
a chlorine shock (see page
4 for FROG Leap Reveille
directions). THIS STEP IS VERY
IMPORTANT TO START-UP.
Always begin with chlorine in
the pool water.
1. 3. 2.
5. 4. 6.
7.
Above Ground
POOL SIZE
Gallons Diameter
8 HOUR PUMP RUN TIME 12 HOUR PUMP RUN TIME 24 HOUR PUMP RUN TIME
PUMP SIZE
1/2 hp 3/4 hp 1 hp 1 1/2 hp
PUMP SIZE
1/2 hp 3/4 hp 1 hp 1 1/2 hp
PUMP SIZE
1/2 hp 3/4 hp 1 hp 1 1/2 hp
7,000 (18’) 5.0 4.5 4.0 3.5 4.5 4.0 3.0 5.0* 3.5 3.0 2.5 4.0*
9,000 (21’) 5.5 5.0 4.4 4.0 5.0 4.5 4.0 5.5* 4.0 3.5 3.0 4.5*
12,000 (24’) 6.0 5.5 5.0 4.5 5.5 5.0 4.5 4.0 4.5 4.0 3.5 5.0*
15,000 NR 6.0 5.5 5.0 6.0 5.5 5.0 4.5 5.0 4.5 4.0 3.5
20,000 NR NR 6.0 5.5 NR 6.0 5.5 5.0 5.5 5.0 4.4 4.0
* – Bypass installation recommended.
NR – This pump isze is not recommended for this size pool.
Shock the pool with FROG Leap
Depth Charge to rid the water of
contaminants (see page 4 for
directions).
3. If your fill water is high in metals, use a
sequestering agent or metal out at start-up only before
using a FROG Leap Anti-Bac Mineral Pac. See your
local dealer for details on using these products and
always follow manufacturers’ directions carefully.
4. After your pool is up and running
smoothly, continue to test your water for pH,
total alkalinity and chlorine with FROG Brand
Test Strips and maintain its balance by
adding any necessary adjustment products
(see your dealer for details).
5. Check the pool’s filter gauge often
and periodically clean filter per the
manufacturer’s directions. A dirty filter will
slow the flow of water which could hamper
proper circulation.
Water Balance Guidelines
pH: 7.2 – 7.8
Total Alkalinity: 60 – 120 ppm
Calcium Hardness: 150 – 400
Total Dissolved Solids: <1500
Stabilizer: 20 – 80 ppm
Free Chlorine: 0.5 – 1.0 ppm
1. Make sure the pool has
adequate circulation. The pool
water must completely circulate
through the pump and filter at
least 1 to 2 times per day. This
usually requires 8 to 12 hours.
Check with your dealer for the
proper circulation time for your
pool.
2. Before beginning with any
pool care program, you must first
balance your pool water. Take a
water sample to your local pool
professional who will test for for
the following important elements.
Swimming Pool Tips
If using standard chlorine shock do not add in or near
the skimmer or into the FROG Leap Infuzer or POOL
FROG Cycler as it could damage equipment, risk
potential explosion or discolor your pool surface.