If using another means of chlorine, How to replace frog leap components, How to replace the frog leap™ components – King Technology FROG Leap Anti-Bac Mineral Pac User Manual

Page 3

Advertising
background image

Open cap. If using
FROG Leap Torpedo
Pac stand back to
avoid inhaling chlorine
fumes.

If using another means of chlorine -

Follow steps 1-5 on Start-up and Operation and then continue below.

Maintain setting of Maximum, Setting 5 or ON
depending on the model. No adjustments needed.

Maintain a minimum chlorine reading of 0.5 ppm
with a chlorine delivery device or hand feeding.

6.

7.

3

Shock pool every two weeks
or as needed to maintain
water quality. Follow label
directions on the shock
treatment used.

Shock pool every two weeks or
as needed to maintain water
quality. Follow label directions
on the shock treatment used.

Remember to adjust dial by 1/2 increments only,
in order to prevent over chlorination which may
bleach pool surfaces.

For the first week test the pool
water daily for free chlorine
with FROG Brand Test Strips
to ensure correct dial setting.
Continue to test weekly
throughout the season.

After testing, adjust the dial up by 1/2 increment
if the free chlorine reading has dropped below 0.5
ppm or down by 1/2 increment if the reading has
risen above 1.0 ppm. Continue this process each
day until the color on the test strip matches the
ideal FROG range of 0.5 ppm to 1.0 ppm chlorine.

8.

9.

8.

Do not add shock in or near the skimmer or into the
FROG Leap Infuzer or POOL FROG Cycler as it could
damage equipment, risk potential explosion or discolor
your pool surface.

Do not add shock in or near the skimmer or into the
FROG Leap Infuzer or POOL FROG Cycler as it could
damage equipment, risk potential explosion or discolor
your pool surface.

Make sure you have the correct FROG Leap Anti-
Bac Mineral Pac to fit your FROG Leap Infuzer or
POOL FROG Cycler. Series 7800 for use in FROG
Leap Infuzer Model 7800 and POOL FROG Cycler
Models 4500, 5100, 5200, 6100, 6500.

Find slot on side
of FROG Leap
Anti-Bac Mineral
Pac and line up
with fin inside
the FROG Leap
Infuzer or POOL
FROG Cycler.
Lower FROG
Leap Anti-Bac
Mineral Pac until
secure.

Use ONLY the factory recommended FROG Leap
Anti-Bac Mineral Pac, FROG Leap ALL-OUT, FROG
Leap Depth Charge, FROG Leap Reveille and FROG
Leap Torpedo Pac. DO NOT USE bulk chemical tab-
lets or any other pac in the cycler. Use of any other
product could result in damage to pool equipment
or surface, unsafe pool conditions, fire or explo-
sion. Warranty will be VOID if the correct FROG
Leap Anti-Bac Mineral Pac, FROG Leap ALL-OUT,
FROG Leap Depth Charge, FROG Leap Reveille and
FROG Leap Torpedo Pac are not used.

Turn off pump and turn dial to Pac Removal,
Setting 0 or OFF depending on the model.

CAUTION read carefully.

Replacing FROG Leap Anti-Bac
Mineral Pac

THE FROG LEAP ANTI-BAC MINERAL PAC MUST
BE REPLACED EVERY 6 MONTHS OR AFTER ONE
POOL SEASON, WHICHEVER IS SHORTER.

IMPORTANT:

Remove and read the
inserted information
card.

How To Replace the FROG Leap™ Components.

Mineral Dispensing System

SLOT IN FROG
LEAP ANTI-BAC
MINERAL PAC

FIN INSIDE
FROG LEAP
INFUZER OR
CYCLER

Pac

Removal

1.

2.

3.

4.

5.

Mark your calendar for the six month replacement of the FROG Leap Anti-Bac Mineral Pac and approximate
replacement times for the FROG Leap Torpedo Pac. Once wetted, the time-released mineral coating of this
product is effective up to 6 consecutive months or one pool season whichever is shorter. After that time
even if you hear the spent media inside it is no longer effective and must be replaced.

6.

Advertising