Replacing shine, optimize and mizermax pac, Replacing aqua smarte plus shine, Aqua smarte plus optimize – King Technology Aqua Smarte Plus Mineral Dispensing System Model 7700 User Manual

Page 8: Or aqua smarte plus mizermax

Advertising
background image

Replace cap by hand only.

DO NOT OVER TIGHTEN.

Line up the small leg of the pac
with the small opening in the Aqua
Smarte Plus Mineral Activator
and the large leg with the large
opening. Lower pac into the Aqua
Smarte Plus Mineral Activator until
secure.

COLORED
CAPS

Turn pac over and shake slightly until
ingredients fall into tower areas.

To remove colored caps, grab onto
the lip of one cap with a pliers and
pull up until cap releases. Repeat
the process for the other cap.

1

.

2.

3.

4.

Run the pump and filter for each pac according to the
directions on the product label. Remove from the Aqua
Smarte Plus Docking Station when empty and discard or
offer for recycling.

5.

Replacing Aqua Smarte Plus Shine

, Aqua Smarte Plus Optimize

or Aqua Smarte Plus MizerMax

Pac

PAC
TOWERS

PAC

TOWERS

PAC

Aqua Smarte

Plus Mineral

Activator

Avoid sparks, open flame or smoking when handling Aqua Smarte
Plus Shine, Aqua Smarte Plus Optimize or Aqua Smarte MizerMax Pac.

Aqua Smarte Plus Shine is a one time start-up product used to rid the water
of all contaminants. Aqua Smarte Plus Optimize - also used at start up, sets
the chlorine residual to help find the proper dial setting for maintaining up to
50%* less chlorine while using the Aqua Smarte Plus MizerMax Pacs (EPA
Reg. No.: 53735-2). All three products sold separately.

WARNING

Aqua Smarte

Plus Shine

Aqua Smarte

Plus Optimize

Aqua Smarte Plus

MizerMax Pac

Advertising