King Technology Sparco System - Manual (Page 12)

KING TECHNOLOGY, INC.
530 11th Avenue South, Hopkins, MN 55343 U.S.A. 952-933-6118
• 800-222-0169 • FAX 952-933-2206 553031043R4N
www.kingtechnology.com
20-48-0150
Limited One-Year Warranty
King Technology, Inc. warrants to the original purchaser this unit
will be free from any defects in workmanship and/or material, for
a period of one (1) year from the date of original purchase. This
warranty covers body, cap and control dial, but specifically
excludes o-rings. King Technology at its option may replace any
defective parts or the entire unit without charge after it is
determined what is needed to correct any deficiency. Replacement
parts with the exception of o-rings are warranted for the remainder
of the original warranty.
1. To obtain warranty service, you must deliver the unit to King
Technology or its nearest authorized dealer. Shipping expenses
are the purchaser's responsibility. The name of the nearest
authorized dealer can be obtained by writing or calling King
Technology at the address and telephone number provided
below. Proof of purchase is required when requesting warranty
service. Purchaser must present the sales receipt or other
documentation verifying proof of purchase.
2. This warranty does not cover defects caused by: Modification,
alteration, repair or service of the unit contrary to the accompanying
instructions; physical abuse to or misuse of the product or
operation or installation in a manner contrary to the accompanying
instructions. This warranty also excludes all costs arising from
the installation, adjustment, removal or replacement of defective
units or parts. This warranty also excludes any and all claims
arising out of the chemicals used in the product or their
characteristics.
3. CAUTION - Read carefully – Failure to follow these
instructions will void the warranty. Do not add shock in or
near skimmer.
A. This unit is not designed for shock treatment of pools.
See your pool dealer or distributor for further information
concerning shock treatments.
B. Control dial settings in excess of the recommended setting
levels for trichlor can result in excess sanitizers being
discharged into the pool. This can result in bleaching or
discoloration of areas around the pool inlet or in some cases
bleaching or discoloration of the entire pool liner or paint.
C. Excess trichlor in the pool can create health hazards to
bathers. Consult each chemical manufacturer's warnings
and cautions for specifics.
D. Misuse or failure to use the proper chlorine chamber as
directed in the instruction manual may cause damage to
equipment or personal injury. This warranty will be null and
void if this unit is not used with the recommended chlorine
chamber.
4. This warranty is the exclusive warranty for the Sparco Cycler.
This warranty is not transferable. KING TECHNOLOGY MAKES
NO REPRESENTATION OR WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, AS TO MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER
CONCERNING THE SPARCO CYCLER. Any express warranty
not provided herein, and any remedy for breach of contract but
which for this provision might arise by implication or operation
of law is hereby excluded and disclaimed. THE EXCLUSIVE
REMEDY FOR ANY CUSTOMER IS THE REPAIR OR
REPLACEMENT OF THE UNIT, AND THE RECOVERY OF
DAMAGES WILL NOT EXCEED THE PURCHASE PRICE OF
THE UNIT. IN NO EVENT WILL KING TECHNOLOGY BE LIABLE
FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL OR
PUNITIVE DAMAGES FROM ANY CAUSE.
5. Under no circumstance shall King Technology be liable to
purchaser or any other person for any damage or loss incurred
because of any chemicals used in the product or their physical
characteristics, or interruption of service of the product, or any
resulting special, incidental or consequential damages or losses.
Some states do not allow the exclusion or limitation of incidental
consequential damages, so the above limitation or exclusion
may not apply to you.
Made in U.S.A.
Covered by one or more U. S. Patent Numbers: 4,662,387; 5,076,315;
5,218,983; 6,190,547; 6,210,566
and other U.S. and Foreign Patents Pending