Contact information and service assistance, Receiving and unpacking, Ontact – Cleveland Motion Controls ULTRA SERIES CARTRIDGE TRANSDUCER REV AA User Manual
Page 6: Nformation and, Ervice, Ssistance, Eceiving and, Npacking, Table b, Table c
U
LTRA
S
ERIES
S
TATIONARY
S
HAFT
T
RANSDUCER
MAN-70251
R
EV
.
AA
P
AGE
6
OF
18
Table B – Determining a Mounting Kit Catalog Number for the Ultra Series Cartridge Transducer
Size
Mounting Style
1T (inch)
2T or 3T (inch)
1T (millimeter)
2T or 3T (millimeter)
Bearing (BR)
MO-04495 MO-04500 MO-05175 MO-05174
Flange (FL)
MO-04493 MO-04498 MO-05176 MO-05177
Pillow Block (PB)
MO-04494 MO-04499
Table C – Determining a Split Bushing Catalog Number for the Ultra Series Cartridge Transducer
If Finished Bore Diameter
(nominal I.D) equals:
Use Catalog
number:
Additional
Information:
1/2 inch
MO-00988-7
5/8 inch
MO-00988-0
3/4 inch
MO-00988-1
7/8 inch
MO-00988-2
1 inch
MO-00988-3
1-1/8 inches
MO-00988-4
1-3/16 inches
MO-00988-5
15 millimeter
MO-00988-9
20 millimeter
MO-00988-6
25 millimeter
MO-00988-8
All Cleveland-Kidder
split bushings have
an outside diameter
of 1.25 inches.
1.2 C
ONTACT
I
NFORMATION AND
S
ERVICE
A
SSISTANCE
For service assistance, have the following information available:
• Type of Cartridge Transducer you are using
• Maximum working force
• Purchase order number
You can contact Cleveland Motion Controls at:
Phone: 216.524.8800
Fax:
216.642.5155
For the latest product information, technical literature etc., visit our website at
Disassembly by improperly trained personnel may result in additional damage to these units. Should repairs
be required or for warranty repairs, contact the Customer Service Department for a return authorization
number before returning the units.
1.3 R
ECEIVING AND
U
NPACKING
After receiving the Ultra Slim Cell Cartridge Transducer you should:
• Carefully, unpack and inspect the equipment
• Compare the received shipment with the packing list
• Report any damage to the carrier and your CMC representative
• Store equipment that will not be used in a clean, dry location
• Take appropriate precautions to prevent moisture, dust and dirt from accumulating in storage and
installation areas