CNB NXE3055VR - Manual (Page 13)

XNET User Manual
13 / 54
ITEM DESCRIPTION
User List -
Displays list of registered users.
"root" is the system’s administrator. "root" cannot be added or deleted.
Only the password for “root” can be changed.
Add -
This adds a new user.
Select [Add User] tap in『User List』Box. To add a new user, enter
『
User name』,『Password』and『User group』then click【 Add 】
button.
Updated User list can be viewed in『User List』Box.
- Up to 10 users can be added.
-『User name』must start with alphabet and its length must be from 1
to 16.
-『Password』length must be from 1 to 8.
Administrator Full control of the XNET system.
Operator Refer to [Diagram 1-1]
Viewer View camera’s video signal only.
Modify -
Modifies information for each user.
Select a user in『User List』Box, enter new『Password』,『User
group』and click【
Modify 】 button to save the changes.
Updated detail can be viewed in『User List』Box.
Remove -
Removes a user.
Select a user in『User List』Box and click【 Remove 】 button to
remove.
Updated detail can be viewed in『User List』Box.
User Settings
Enable
anonymous
viewing
Turns Anonymous Viewer mode on or off.
When enabled, Web Viewer can be accessed without a log-in prompt.
Save - Applies and saves the configurations.
Reset - Recalls previously the saved configurations.
Please disable『Enable anonymous viewing』function if registered users at『User List』
only want to monitor network camera’s live view.