CNB NXE3055VR - Manual (Page 26)

XNET User Manual
26 / 54
ITEM DESCRIPTION
RTSP
Configuration
RTSP Port
Enter RTSP Port of the Main Stream between 1 and 66535.
<Default : 554>
RTP
Configuration
RTP Start Port
Enter RTP Start Port between 1024 and 65435. <Default : 2000>
The minimum difference between RTP Start and End Port should be
100.
RTP End Port
Enter RTP End Port between 1124 and 65535. <Default : 3000>
The minimum difference between RTP Start and End Port should be
100.
Maximum
number of
users to
connect
Enter the maximum allowable number of users connected to the
Stream between 1 and 10. However, it can be very depending on Main
Stream’s Bitrate.
Maximum number of users to connect = 16Mbps / Main Stream’s
bitrate. (1<= Maximum number of users to connect <=10)
Bitrate Number of users to connect
9M ~ 10M 1 people
6M ~8M 2 people
5M 3 people
4M 4 people
3M 5 people
2M 8 people
64K ~ 1M 10 people
Multicast
Configuration
TTL Value Enter TTL value for outgoing multicast between 1 and 255.
1 st Address Enter the destination IP address of Main Stream.
2 nd Address Enter the destination IP address of Dual Stream.
3 rd Address Enter the destination IP address of Triple Stream.
Video Port Enter Video Port between 1124 and 65535. <Default : 49990>
Audio Port Enter Audio Port between 1124 and 65535. <Default : 49992>
Save - Applies and saves the configurations.
Reset - Recalls previously the saved configurations.