Codelocks KL1500 KitLock Locker Lock - Manual

INSTALLATION GUIDE
Step 1 Remove existing cam lock.
Step 2 Place the template over the
hole left by the cam lock and
mark the upper and lower
fixing holes.
Step 3 Drill the two 6mm ( 1 / 4 ”) fixing
holes.
Step 4 Fit lock to door with gasket in
place using fixing bolts. Cut
bolts to correct length.
Measured from beneath the
bolt head, the length should
be the cabinet thickness, plus
approx 12mm (
1 /
2
”).
Replace existing cam lock with the KitLock
Step 5 From the inside of the door select
and fit appropriate cam spindle
and cam using cam fixing bolt
supplied.
The length of cam and spindle
selected to suit your door and
frame.
Step 6 Before closing the door check
the operation of the lock with
Master and User Code.
Step 7 If not changed already
CHANGE FACTORY SET
MASTER AND USER CODE
NOW!
Step 8 If not already fitted, select and fit
coloured insert
.
Installation
instructions
CODELOCKS LTD UK
Tel: +44 (0) 1635 239645
Fax: +44 (0) 1635 239644
[email protected]
Helpline, service & spares
FREEPHONE 0800 393 405
CODELOCKS INC US
Tel: +1 714 979 2900
Fax: +1 714 979 2902
[email protected]
Help: 1.877.CODELOCK
www.codelocks.com
Step 1 Place template on door and
mark upper and lower 6mm
(
1 / 4 ”) fixing holes and 16mm
( 5 / 8 ”) spindle hole.
IMPORTANT NOTE: Before
drilling fixing holes, please
ensure the position of the
KitLock when fitted will allow
enough clearance for selected
cam to work.
Step 2 Drill all three fixing holes.
Step 3 Continue installation from
Step 4 to 8 from the Installation
Guide (Section A).
New Installation
A
B
II-
K
L1
5
0
0
-v
2
:0
6
1
3
www.kitlock.com
[email protected]
[email protected]
12
KitLock is a Codelocks Limited brand
K
L1
5
O
O
Installation
Instructions
kitlock 1500 inst. 8pp_Layout 1 26/06/2013 16:39 Page 1