AT&T CL80109 - Manual (Page 10)

Getting started
6
Battery installation & charging
Step 1
Plug the battery securely into
the connector inside the handset
battery compartment, matching
the color-coded label. Insert
the supplied battery with the
label
THIS SIDE UP facing up as
indicated.
Step 2
Align the cover flat against
the battery compartment, then
slide it upwards until it clicks
into place.
Step 3
Charge the handset by placing it face up in the
charger. The
CHARGE light on top of the handset is
on during charging.
IMPORTANT INFORMATION
1. Use only the supplied rechargeable battery or replacement battery
(model BT8001). To order, visit our website at
www.telephones.att.com
or call
1 (800) 222-3111
. In
Canada, dial
1 (866) 288-4268
.
2. If you do not use the handset for a long time, disconnect and remove
the battery to prevent possible leakage.
CHARGE light