Controlled Products Systems Group MVPDTEK - Manual (Page 2)

We have designed the new MVP-D-TEK vehicle loop detector with the following objectives in mind:
1. Compact package to allow easy installation into small operator housings.
2. All the controls are accessible from the outside for easy installation and operation.
3. Integral loop conditioner is provided, to enable detector operation with marginal loops.
4. Provide all the features and controls necessary for a variety of applications.
5. Use metal housing for maximum durability and RF blocking.
6. Provide maximum surge protection on all inputs and outputs of the detector.
We took extra care to achieve and exceed these objectives. For example the controls are divided into
two groups. The group on the front of the detector is for basic operation and the group on the back of
the detector is for advanced settings. This way the more advanced settings are not visible to the casual
user. There is no skimping on the quality in the MVP-D-TEK detector. The housing is made from
aircraft quality anodized aluminum. All the switches have gold plated contacts and are sealed for
protection. The detector is protected by a thermal resettable fuse, snubbing circuitry on the relay
contacts, metal oxide varistor on the power input and triple protection on the loop input. The
MVP-D-TEK features are extensive and they include full loop diagnostics with frequency counter, 10
sensitivity settings, delay and extend features, "fail safe" and "fail secure" operation, automatic
sensitivity boost, pulse or two presence relay operation and more.
Technical Information
Detector Connections
Pin Function Harness
1 Power 9V DC - 240V AC White
2 Power Black
3 Relay 2 N.O Orange
4 Ground Green
5 Presence Relay Comm. Yellow
6 Presence Relay N.O. Blue
7 Loop
Gray
8 Loop Brown
9 Relay 2 Comm.. Red
10 Presence Relay N.C. Pink
11 Relay 2 N.C.
Violet
Note: Functions on pins 6 and 10 are reversed if DIP 4 is set to OFF "Fail Secure" operation