AEG EXTRACTORHOOD 125 D - Manual (Page 10)

10
● Set the chimney according to the measured height and stop its
run with the two fixing screws 2,9x6,5 mm supplied (fig. 6).
●
Fix the chimney to the aesthetic top with two screws 2,9x6,5
mm supplied (fig. 7).
●
From the inside of the hood, fix the aesthetic top with four screws
M3x6 supplied (Two each side)(fig. 8).
● Fix the upper bracket to the wall, close to the ceiling,
perpendicularly to the outlet hole of the hood with 2 screws
5x45 mm (fig. 8).
● Fix the chimney to the bracket with two screws 2,9x6,5 mm
(fig. 8).
6
7
8