Removing the filter, Carbon filter – AEG EXTRACTORHOOD 125 D User Manual
Page 14
14
11
Removing the filter
Open the grid and remove the stops M to take out the filter. See
Fig. 6.
Carbon filter
●
The activated carbon filter should only be used if you want to use
the hood in recirculation mode.
●
To do this you will need an original AEG activated carbon filter
(available as an accessory).
●
This filter cannot be cleaned or reused.
●
As a general rule, the activated carbon filter should be
changed once every four months.
●
Mounting Fig 11
a. Fit first rearwards on the proper seats.
b. Then fix frontwards the carbon filter using hooks C.
●
Dismounting :
Unhook the carbon filter from its housing pushing hooks C.
●
Always specify the hood model code number and serial number
when ordering replacement filters. This information is shown on
the rating plate located on the inside of the unit.
●
The activated carbon filter can be ordered from AEG Servire
Force.