Impulse DSCA Isolated Analog Signal Conditioners - Manual

High Performance Signal Conditioners DSCA
Visit our website www.dataforth.com 185
DSCA
©1995-2009 Dataforth Corporation, All Rights Reserved ISO9001:2000-Registered QMS
DSCA
High Performance DIN Isolated Analog Signal Conditioners
ANALOG VOLTAGE INPUT MODULES, 3Hz BW Page 188
MODEL
INPUT RANGE OUTPUT RANGE †
DSCA30-01 –10mV to +10mV 1
DSCA30-02 –50mV to +50mV 1
DSCA30-03 –100mV to +100mV 1
DSCA30-04 –10mV to +10mV 2, 3, 4
DSCA30-05 –50mV to +50mV 2, 3, 4
DSCA30-06 –100mV to +100mV 2, 3, 4
DSCA30-07 0 to +10mV 2, 3, 4
DSCA30-08 0 to +50mV 2, 3, 4
DSCA30-09 0 to +100mV 2, 3, 4
DSCA31-01 –1V to +1V 1
DSCA31-02 –5V to +5V 1
DSCA31-03 –10V to +10V 1
DSCA31-04 –1V to +1V 2, 3, 4
DSCA31-05 –5V to +5V 2, 3, 4
DSCA31-06 –10V to +10V 2, 3, 4
DSCA31-07 –20V to +20V 1
DSCA31-08 –20V to +20V 2, 3, 4
DSCA31-09 –40V to +40V 1
DSCA31-10 –40V to +40V 2, 3, 4
DSCA31-11 0 to +1V 2, 3, 4
DSCA31-12 0 to +5V 2, 3, 4
DSCA31-13 0 to +10V 2, 3, 4
DSCA31-14 0 to +20V 2, 3, 4
DSCA31-15 0 to +40V 2, 3, 4
ANALOG CURRENT INPUT MODULES Page 190
MODEL
INPUT RANGE OUTPUT RANGE †
DSCA32-01 4mA to 20mA 2, 3, 4
DSCA32-02 0mA to 20mA 2, 3, 4
DSCA32-03 –20mA to 20mA 1
ISOLATED TRUE RMS INPUT MODULES Page 192
MODEL
INPUT RANGE (rms) OUTPUT RANGE (dc) †
DSCA33-01 0 to 100mV 2, 3, 4, 5, 6
DSCA33-02 0 to 1V 2, 3, 4, 5, 6
DSCA33-03 0 to 10V 2, 3, 4, 5, 6
DSCA33-04 0 to 150V 2, 3, 4, 5, 6
DSCA33-05 0 to 300V 2, 3, 4, 5, 6
DSCA33-06 0 to 1A 2, 3, 4, 5, 6
DSCA33-07 0 to 5A 2, 3, 4, 5, 6
LINEARIZED 2- or 3-WIRE RTD INPUT MODULES Page 194
MODEL
INPUT RANGE OUTPUT RANGE †
100 Ω Pt **
DSCA34-01 –100°C to +100°C (–148°F to +212°F) 2, 3, 4
DSCA34-02 0°C to +100°C (+32°F to +212°F) 2, 3, 4
DSCA34-03 0°C to +200°C (+32°F to +392°F) 2, 3, 4
DSCA34-04 0°C to +600°C (+32°F to +1112°F) 2, 3, 4
DSCA34-05 –50°C to +350°C (–58°F to +662°F) 2, 3, 4
120 Ω Ni **
DSCA34N-01 0°C to +300°C (+32°F to +572°F) 2, 3, 4
Description
Each Instrument-Class TM DSCA module provides a single channel of isolated
analog input or output. Various input modules accept analog voltage or current
signals from all types of field sensors and sources and filter, isolate, amplify,
linearize, and convert these input signals to high-level analog outputs suitable
for use in data acquisition, test and measurement, and control systems. Output
modules accept high-level analog voltage signals from a system, then buffer, isolate,
filter, and amplify before providing a current or voltage output to a field device.
• ±0.03% Accuracy
• Industry Standard Output of either
0 to 10V ±10V, 0 to 20mA, or 4 to 20mA
• 1500Vrms Transformer Isolation
• ANSI/IEEE C37.90.1 Transient Protection
• Input Protected to 240VAC Continuous
• True 3-Way Isolation
• Wide 15V - 30VDC Supply Voltage Range
• 160dB CMR
• 85dB NMR at 60Hz, 80dB at 50Hz
• ±0.01% Linearity
• Easily Mounts on Standard DIN Rail
• Highest Performance-to-Cost Value
• Screw Terminals and Plug-in Terminal Blocks
Simplify Wiring and Maintenance
• C-UL-US Listed
• CE and ATEX Compliant
Features
DSCA Selection Guide