Impulse 8003e - Manual (Page 22)

©Sealevel Systems, Inc. 8003e Manual 22
SL9235 3/2013
9. Elevate permission level by changing to root:
$ su
Or use the ‘super user do’ command:
$ sudo –s
10. Install the drivers by typing:
$ make install
11. If the package contains drivers, refer to the documentation for your package to find the
command that will load your drivers. For example, the SeaI/O package uses:
$ seaioload
At this point, the driver has enabled the hardware and it is ready to use. You now have the option to run a
test utility on it. Test utilities were compiled in step 8, and they are located in the package’s folder named
seaio/utilities/ and installed globally in step 10 to: /usr/bin.