Impulse SIO4-104.485 (3543) - Manual (Page 4)

© Sealevel Systems, Inc. - 2 - SIO4-104.485 User Manual
Before You Get Started
What’s Included
The SIO4-104.485 is shipped with the following items. If any of these items is missing or
damaged please contact Sealevel for replacement.
• SIO4-104.485 Adapter
• Sealevel SeaCOM Software CD
Optional Items
Depending upon your application, you are likely to find one or more of the following items useful
for interfacing the SIO4-104.485. All items can be purchased from our website
(
http://www.sealevel.com/ ) or by calling 864-843-4343.
Cabling Options :
IDC 40 to (4) DB9 Male connectors, 8” in length - (Item Number CA228)
Terminates the SIO4-104.485’s 40-pin header to four DB9M connectors.
DB37 Male to 6” IDC40 Ribbon Cable and (1) DB37 to (4) DB9 Males, 36” in length -
(Item Number CA110/CA143)
This combination of cables also terminates the SIO4-104.232’s 40-pin header to four
DB9M connectors. The CA110 provides a bulkhead mountable DB37 Male connector
and the CA143 provides a DB37 to 4 DB9 male connectors via a 36-inch ‘Spider’ cable.
IDC40 to 18” IDC40 Ribbon Cable and IDC40 to (4) DB9 Male Terminal Block - (Item
Number CA222/TB10)
This combination of cables also terminates the SIO4-104.485’s 40-pin header to four
DB9M connectors via a bulk head mountable terminal block assembly. It provides four
DB9 male connectors that can easily be integrated into the Sealevel Systems Relio line of
embedded I/O servers.
DB9 Male to DB9 Female Optomux adapter (Item Number DB103)
The DB103 is designed to convert a Sealevel DB9 Male connector to a pinout compatible
with AC24AT and AC422AT Opto-22 ISA bus cards. This allows Optomux devices to be
controlled from any Sealevel RS-422 board with a DB9 Male connector.
DB9 Male to DB9 Male Sony 207M adapter cable (Item Number CA190)
This cable allows any Sealevel RS-422 adapter with a DB-9 to connect directly to a Sony
(or compatible) 207M "9 Pin" connector.