Impulse ACB-104 (3512) - Manual (Page 4)

Introduction
Sealevel Systems ACB-104 Page 1
Introduction
Overview
The Sealevel Systems ACB-104 provides the PC with one high-speed RS-232/530/422/485
synchronous/asynchronous port. The ACB-104 can be used in a variety of sophisticated communications
applications such as SDLC, HDLC, X.25, Bi-Sync, Mono-Sync, and high-speed asynchronous.
What’s Included
The ACB-104 is shipped with the following items. If any of these items are missing or damaged, contact the
supplier.
• (1) ACB-104 Adapter
• (1) DB-25 Cable Assembly
• (1) Nylon Hardware Kit
• Sealevel Software
Factory Default Settings
The ACB-104 factory default settings are as follows:
Base Address DMA Selection IRQ Electrical Specification
238 TX: 1 / RX: 3 5 RS-530/422
To install the ACB-104 using factory default settings, refer to the section on Installation.
For your reference, record installed ACB-104 settings below:
Base Address DMA Selection IRQ Electrical Specification