Impulse 8018 User Manual
Page 10
Advertising
© Sealevel Systems, Inc.
- 8 -
PIO-24.LPCI User Manual
Reading the Inputs
The inputs are active true. If an input is driven high (2V to 5.25 V) it will read as a
logical one, if driven low (0V to 0.8V) it will read as a logical zero. If an input is not
driven it will read as a one due to the 10K ohm pull up resistors on each port.
Reading the Outputs
The value that is currently being used to drive the outputs will be returned.
Advertising
This manual is related to the following products: