Impulse 8207 User Manual - Manual (Page 6)

© Sealevel Systems, Inc. - 4 - SEALINK ISO-16 User Manual
Physical Installation
The SeaLINK ISO-16 can be installed in any open USB port.
Do not plug the unit into a USB port until the software has been fully installed.
1. Simply connect the SeaLINK ISO-16 to your USB port with the supplied
cable.
2. The software drivers installed during setup will automatically recognize and
configure the device.
3. You should see one or more “New Hardware Found” windows, indicating
the actual device being created.
4. Next, view your system’s Device Manager.
5. You should have a new ‘SeaIO 8207’ in the SeaI/O Device heading
indicating the installation was successful.
The SEALINK ISO-16 is now ready for use.