Impulse 8206 User Manual - Manual (Page 6)

© Sealevel Systems, Inc. - 4 - SEALINK PLC-16 User Manual
Physical Installation
The SeaLINK PLC-16 can be installed in any open USB port.
Do not plug the unit into a USB port until the software has been fully installed.
1. Simply connect the SeaLINK PIO-96 to your USB port with the supplied
cable.
2. The software drivers installed during setup will automatically recognize and
configure the device.
3. You should see one or more “New Hardware Found” windows, indicating
the actual device being created.
4. Next, view your system’s Device Manager.
5. You should have a new ‘SeaIO 8206’ in the SeaI/O Device heading
indicating the installation was successful.
The SEALINK PLC-16 is now ready for use.