Impulse 5104 - Manual (Page 15)

© Sealevel Systems, Inc. - 13 - ACB-ULTRA.LPCI User Manual
Appendix A – Troubleshooting
Following these simple steps can eliminate most common problems.
Install software first. After installing the software then proceed to adding the
hardware. This places the required installation files in the correct locations.
Read this manual thoroughly before attempting to install the adapter in your system.
Use Device Manager under Windows to verify proper installation.
Use the SeaIO Control Panel applet or the Device Manager’s property page for card
identification and configuration.
If these steps do not solve your problem, please call Sealevel Systems’ Technical
Support, (864) 843-4343. Our technical support is free and available from 8:00AM-
5PM Eastern Time Monday through Friday. For email support contact
mailto:[email protected] .