Installation – Impulse 2102 User Manual
Page 5
Installation
Sealevel Systems SeaLINK+485 Page
2
Installation
Operating System Installation
Choose Install Software at the beginning of the CD and select the Serial I/O
software drivers and install SeaCOM.
System Installation
The screen captures below are taken from a Windows 98 installation. Your
particular operating system may differ slightly from what is shown based on
your version of windows.
The SeaLINK+485: can be connected to any Upstream Type “A” port either at
the PC host or an Upstream Hub. The SeaLINK+485 is hot-pluggable, meaning
there is no need to power down your computer prior to installation. The
SeaLINK+485: requires no user hardware configuration since there are no
jumpers present on the card.
1. Connect SeaLINK+485 to an Upstream Host or Hub.
This indicates that the system has recognized the new device and will now
proceed to locate a driver.