Impulse 2161 - Manual (Page 4)

© Sealevel Systems, Inc. - 2 - SeaLINK+16/232.RJ User Manual
Before You Get Started
What’s Included
The SeaLINK+16/232.RJ is shipped with the following items. If any of these items
is missing or damaged please contact Sealevel for replacement.
Item# 2161 – SeaLINK+16/232.RJ USB 16-Port Serial Device
Item# CA179 – 72” USB ‘A’ to ‘B’ Device Cable
Item# TR101 – 5VDC @ 3A Power Supply
Item# LB116 – RS-232 RJ45 Serial Loopback
Sealevel SeaCOM Software CD
Optional Items
Depending upon your application, you are likely to find one or more of the
following items useful for interfacing the SeaLINK+16/232.RJ. All items can be
purchased from our website (http://www.sealevel.com) or by calling 864-843-4343.
DB9 Male to RJ45 Modular Adapter (Item# RJ9P-232)
Preconfigured for use with the SeaLINK+16/232.RJ, this modular adapter
converts the RJ45 RS-232 pinout from the SeaLINK+16/232.RJ to a DB9 male
RS-232 serial port. Standard CAT5 patch cables can be used to extend the serial
port up to 50 feet away from the SeaLINK+16/232.RJ.
DB25 Male to RJ45 Modular Adapter (Item# RJ25P-232)
Preconfigured for use with the SeaLINK+16/232.RJ, this modular adapter
converts the RJ45 RS-232 pinout from the SeaLINK+16/232.RJ to a DB25 male
RS-232 serial port. Standard CAT5 patch cables can be used to extend the serial
port up to 50 feet away from the SeaLINK+16/232.RJ.
DB9 Male to RJ45 Modular Adapter (Item# RJ9P8)
The RJ9P8 includes an RJ45 connector and converts it to a DB9 Male connector,
which allows the use of standard twisted pair cabling. The RJ9P8 ships
unassembled and can be configured for virtually any pin out.
DB25 Male to RJ45 Modular Adapter (Item# RJ25P8)
The RJ25P8 includes an RJ45 connector and converts it to a DB25 Male
connector, which allows the use of standard twisted pair cabling. The RJ25P8
ships unassembled and can be configured for virtually any pin out.
USB ‘A’ to ‘A’ Extension Cable, 3 Meters in Length (Item# CA214)
The CA214 is a fully rated USB extension cable that allows adding 3 meters
(USB maximum of 5 meters) to any existing USB cable. The cable has a type ‘A’
male connector on one end and a type ‘A’ female connector on the other end.
RJ45 Patch Cable, 7’ in Length (Item# CA246)
Standard 7’ CAT5 patch cable with one-to-one pinout.
RJ45 Patch Cable, 10’ in Length (Item# CA247)
Standard 10’ CAT5 patch cable with one-to-one pinout.