Laurel Electronics LT SERIES TRANSMITTERS PULSE INPUTS - Manual (Page 9)

- - 9 -
In the Establish Communications screen, select your Com Port and 9600 as the Baud Rate.
You will be able to change your protocol and baud rate later under the Communication setup
tab. Click on Establish , and the two fields at the bottom of the screen should turn green. Click
on the Main Menu button.
From the Main Menu , click on Counter => Get Setup to retrieve (or get) the existing setup data
from your counter transmitter. Click on View => Setup to bring up screens which allow you to
easily edit the setup file using pull-down menus and other selection tools. You can download
(or put) your edited file into the transmitter by clicking on
Counter => Put Setup . You can save
your setup file to disk by clicking on File => Save Setup and retrieve a previously saved file from
disk by click on File => Open .
The best way to learn IS software is to experiment with it.
For detailed help on any data entry field under any tab, select that field and press on the F1
key.