Laurel Electronics LT: 4-20 mA & Serial Data Output Transmitter for DC Voltage or Current Signals - Manual (Page 4)

LAUREL ELECTRONICS INC. , 3183-G Airway Ave., Costa Mesa, CA 92626, USA • Tel 714-434-6131 • www.laurels.com 4
Ordering Guide
Create a model a model number in this format: LT20DCV1, CBL04
Transmitter Type LT Laureate Transmitter
2 Standard Main Board
4 Extended Main Board Main Board
Note: Extended allows custom curve linearization and rate from successive readings.
Power 0 Isolated 85-264 Vac
1 Isolated 12-32 Vac or 10-48 Vdc
DC Volts
DCV1 ± 200.00 mV
DCV2 ± 2.0000
DCV3 ± 20.000 V
DCV4 ± 200.00 V
DCV5 ± 600.0 V
DC Amps
DCA1 ± 2.0000 mA
DCA2 ± 20.000 mA
DCA3 ± 200.00 mA
DCA4 ± 5.000 A
Signal Input
Note: The same DC signal conditioner can be user configured for DC Volts or DC
Amps, and for process, strain or potentiometer follower signals. It is precalibrated in
EEPROM for all DC Volt and DC Amp ranges listed.
Accessories CBL04 RS-232 cable, LTA to computer or USB adapter
CBL02 USB to RS-232 cable adapter