Laurel Electronics Ethernet Node Configuration for Series 2 Digital Panel Meters, Counters, Timers, Transmitters and Ethernet-to-Serial Device Servers - Manual (Page 33)

33
3. DEVICE INTERFACE SETUP Web Page
How to get here: From the top navigation bar of the selected Node.
Background: The Device Interface Setup screen applies to the Node whose MAC address is shown
in the top right of the screen. If the selected Node is an LNET Ethernet I/O board of a meter, only
that single host meter will be discovered as the device for that Node. If the selected Node is an
LNET485 or LTNET485 Ethernet-to-serial device server option board of a meter or is a DIN-rail
Ethernet-to-serial device server, up to 31 physical devices may be discovered, including the Node
itself. Since Modbus allows addresses of 1-247, there can be unused addresses.
Top row: Links to the EMAIL SETUP, NETWORK SETUP, and NODE SETUP web pages for this
Node.
SELECT DEVICE: Click on the selector button to display all devices that have been discovered
automatically for the selected Node. All device names are preceded by a number followed by an =
sign. Click on a device name to select that device, and its name will then be shown in reverse font.
You will then be able to make setup changes for the selected device using this screen.