Lectrosonics R170 - Manual (Page 12)

SPECIFICATIONS AND FEATURES
R170 RECEIVER
Operating frequencies: 150 to 216 MHz crystal controlled
Sensitivity: 1.0uV for 20dB SINAD
2.0uV for 50dB S/N ratio
Signal/noise ratio: 96 dB flat; 100 dB A-weighted
Squelch quieting: greater than 100 dB
AM rejection: -40 dB (10uV to 0.1 Volts)
Modulation acceptance:
±
15kHz
Image/spurious rejection: greater than 100 dB
Audio outputs: * XLR: 200 Ohm balanced; 100mV max.
* ¼ inch: 600 Ohm; 700 mV max.
(500 mV max. unbalanced)
* RCA: 1k Ohm unbalanced; 1 Volt max.
Audio input: RCA jack for unity gain audio mixing bus
Antenna input: PL259 female; 50 Ohm impedance
Controls: Front panel attenuator controls balanced outputs; 3
position power/function switch
Indicators: LED for power "ON"
2 LEDs for modulation level
"RF" LED for transmitter "ON"
Power requirements: * 12 Volt DC direct to panel mounted jack
* 110 Volt AC via CH-12 AC adapter
Power consumption: 125 mA max.
Weight: 2.1 lbs
Dimensions: 2.9 x 7.4 x 5.3 inches
11