Lectrosonics UCR201 User Manual

Page 13

Advertising
background image

UHF Wireless Diversity Receiver

Scan

1000

100

10

1

uV

No RF activity (clear channel)

B8

6. If necessary, press the

MENU button to zoom
in for greater detail for
fine adjustment.

Fine adjustment can be made

B8

when zoomed closer

8. Then press the SEL Up and Down arrows to

move the marker to the middle of a clear area
where there is no RF
activity. If an area

1000

100

with no RF activity

10

cannot be found

1

uV

anywhere in the
spectrum, locate one

Move marker to area with no

B8

with the least amount

RF activity

of RF activity.

9. Press all three buttons (SEL Up and Down and

MENU) to move to the next screen. Two options
will be shown.

Press the SEL Down arrow button to
select the USE NEW option and set the
receiver to the new frequency just found
in scanning.

Press the SEL Up arrow button to select

.

USE OLD and return to the frequency
that was set before scanning.

USE OLD
USE NEW

OFF ON

MENU

ANT 1

ANT 2

SELECT

Div RF

Aud Rx Tx

BAT

1000

100

10

1

uV

UCR 201

Use the SEL Up and Down arrow buttons to

select the old or new frequency.

LOCKING AND UNLOCKING THE UCR201
FRONT PANEL CONTROLS

The front panel panel controls can be “LOCKED” to
prevent accidental changes being made during operation
and handling.

To LOCK - Press and hold the MENU button until a bar
tracks horizontally across the LCD screen and the word
“LOCKED” appears. If the MENU button is released
before the word “LOCKED” appears, the unit will remain

UNLOCKED. When in a LOCKED state, the pilot tone
bypass toggle is also defeated.

In LOCKED state, the use of the MENU and SELECT
Up/Down buttons are limited to “view only” and attempts
to change selections will result in a screen displaying the
word “LOCKED.” The unit cannot be used for RF
scanning when it is set in the LOCKED state.

To UNLOCK - Press and hold the MENU button until a
bar tracks horizontally across the screen and the word
“UNLOCKED” appears. When the unit is UNLOCKED, all
settings can be altered.

The receiver can be LOCKED or UNLOCKED from any
of the four primary windows. It cannot be LOCKED from
the scanning mode or from other subordinate screens.

Rio Rancho, NM – USA

13

Advertising