Lectrosonics H175DC - Manual (Page 3)

Plug-On Transmitter
INTRODUCTION
Thank you for selecting the Lectrosonics Professional Series wireless microphone
system.
This system represents well over 20 years of manufacturing experience in wireless
microphones, and almost 70 years of design experience. It is the best value avail­
able today. You will find that the H175DC radiates more power than other standard
handheld wireless microphones. This provides both greater operational range, as
well as improved signal-to-noise ratio.
If you are new to wireless microphones, you will discover a new freedom of move­
ment and convenience. If you are an experienced wireless user, you will be pleas­
antly surprised with the effortless, quiet performance of the Lectrosonics Professional
Series design. Over time, you will appreciate the rugged dependability of the
H175DC. Superior mechanical design and construction mean years of trouble-free
use.
Only the H175DC transmitter is covered in this manual. A matched transmitter/
receiver combination makes up a “system.” Receivers are explained in separate
manuals.
The H175DC transmitter is constructed of metal and operates on interference-free
high band frequencies from 169 to 172MHz and 174 to 186MHz. Since the H175DC
uses the actual microphone case as an antenna, there is no need for any unsightly
extra wires. The H175DC plugs into the XLR jack of any hand-held microphone,
giving the user the greatest choice of mics.
TABLE OF CONTENTS
INTRODUCTION .................................................................................................. 3
GENERAL DESCRIPTION .................................................................................. 4
CONTROLS AND FUNCTIONS .......................................................................... 5
OPERATING INSTRUCTIONS ............................................................................ 6
BATTERY REPLACEMENT ................................................................................. 8
TROUBLESHOOTING ......................................................................................... 9
SPECIFICATIONS AND FEATURES ................................................................. 10
SERVICE AND REPAIR ..................................................................................... 11
RETURNING UNITS FOR REPAIR ................................................................... 11
WARRANTY ......................................................................................... Back cover
H175DC series transmitters are FCC type accepted under the following Parts:
Part 90 (150-172 MHz)
Part 74 (174-216 MHz)
Rio Rancho, NM – USA 3