Lectrosonics H175DC - Manual (Page 6)

OPERATING INSTRUCTIONS
1) Install the Microphone onto the transmitter.
a. Unscrew the collar by turning it fully clockwise until it
stops.
Locking tab fully retracted
b. Turn the collar two turns counter-clockwise to
extend the locking tab
Knurled knob
turned completely
clockwise.
Compression Washer
Locking tab partially extended
Knurled knob
turned two turns
counter-clockwise.
Click!
c. Press the mic onto the XLR connector until you
hear a “click.” The click indicates the mic has
locked into place.
d. Tighten the collar by turning it counter-clockwise.
e. Pull on the mic to ensure locking.
f. For added security, tighten the setscrew.
Warning: Worn mics may not “click” and may not properly lock.
Be sure to use the setscrew to lock it in place.
6