Lectrosonics UT300VM - Manual (Page 7)

Frequency Agile Handheld Transmitter, Euro Model
ADJUSTING THE TRANSMITTER FREQUENCY
To change frequencies, remove the cover door on the
side of the transmitter using your fingernails to expose
two rotary switches. The switch nearest the windscreen
changes the operating frequency in FINE increments.
The switch farthest from the windscreen makes changes
in COARSE increments. If you are experiencing interfer­
ence, change the operating frequency of the receiver to
find a clear channel, then set the transmitter frequency to
match.
To gain access to the Frequency Switches, pull the
access door straight out. It is held in place magnetically.
There is a “doorknob” provided for gripping with the
fingernails.
Frequency Adjustment Switches
Coarse Fine
Frequency
Adjustment Switches
Magnetic Door
Door Knob
Audio Level Control
External LED off
External Switches
Bypass
Rio Rancho, NM - USA 7