Lectrosonics SPNCWB - Manual (Page 7)

Installation and Startup Guide
Rio Rancho, NM 7
SPNCWB
ASPEN PORT ETHERNET RS-232
CODEC
1
POWER AMP
OUTPUTS
LINE
OUTPUTS
CODEC
2
LINE
INPUTS
CODEC
1
CODEC
2 1 2
TELEPHONE
LINE
REMOTE
CONTROL
RC 2
RC 1
SET
GND
+5V PROG IN
PROG
OUT
S/N LABEL
DATECODE
100-240V
50/60Hz 35W
Made In the USA
Rear Panel
Programmable Input and Output Ports
Programmable inputs and outputs used to control
levels, settings, indicate the current state of a program-
mable input and control a variety of other parameters.
ASPEN Bus Data/Audio Ports
These RJ-45 jacks carry the audio signals and control
data between units stacked together.
Remote Control
These RJ-45 jacks provide interfaces for RCWTH4
remote control units. Each jack is assignable to CODEC
1 or 2, or to the telephone line.
Audio Inputs and Outputs
Analog audio input and output connectors for the Codec
ports.
Telephone Set/Line
RJ11 jacks for connecting a standard telephone line
and a single-line telephone set.
Power Inlet RS232
Serial Port
Programmable Input
and Output Ports
Data/Audio
Bus Ports
Line Inputs
(Codecs)
Telephone
Set/Line
Line Outputs
(Codecs)
Remote
Control
Cooling Fan
Outlet
Speaker
Terminals
Ethernet
Port