Procedure – Apple Xserve G5 User Manual

Page 66

Advertising
background image

64 -

Xserve G5 Take Apart

Power Supply

Procedure

1. Release the thumbscrew that secures the power supply to the chassis.

Note:

The thumbscrew is captive; you cannot remove it.

2. Lift the front end of the power supply to disconnect it from the logic board.

3. Slide the power supply a short distance toward the front of the server so that the

power receptacle clears the opening in the back panel.

4. Holding the power supply in both hands, remove it from the server.

Advertising