Liquid Controls SP1200 - Manual (Page 5)

“SET-UP” menu will
be displayed:
“2-RTD” should not be selected. This is a factory calibration function.
Select “3-Factor” by pressing “3” key.
***NOTE: To exit the “SET-UP” menu press “RESET” key.
Select desired product and press corresponding key.
To retain displayed Rfactor: Press “RESET” key, display will advance.
To change displayed Rfactor: Press “CLEAR/FEED” key. Enter new Rfactor,
Press “ENTER” key, display will advance.
To retain displayed Tfactor: Press “RESET” key, display will advance.
To change displayed Tfactor: Press “CLEAR/FEED” key, Enter new Tfactor,
Press “ENTER” key, display will advance.
To continue “FACTOR”: Select desired product, press corresponding key.
Repeat.
To exit the “FACTOR” menu: Press “RESET” key, “SET-UP” menu will be displayed:
1 = Clock
2 = RTD 3 = Factor
4 = More
Product Number?
Product Number?
0 = LOX
.30456 Rfactor?
0 = LOX
.005076 Tfactor
PRODUCT SELECTOR
0 = LOX
1 = LIN
2 = LAR
3 = LCO2
4 = N20
5 = CCO2
6 = MAPP
7 = LPG