Luna Optics EBG1-PRO - Manual (Page 5)

5
INSTALLING THE BATTERIES:
Your night vision unit operates on commonly available 2 AA-
type batteries.
To install the batteries, unscrew the battery compartment cover
(13), and install the batteries inserting the positive (+) end first.
Once the batteries are inside, replace the cover.
USING THE UNIT AS A HANDS-FREE GOGGLES SYSTEM:
IMPORTANT: FOR MODEL LN-EBG1-PRO PLEASE READ SECTION
“MENU SWITCH” ON PAGE 9 ENTIRELY PRIOR TO USING YOUR
GOGGLES WITH THE HEAD-MASK!
Your night vision bi-ocular can be used on a head-mask,
providing hands-free operation. Mounting is easy and
convenient:
1. Slide in the rail of the head-mask into the pathway
located on top of the unit near the Momentary Switch
button.
2. Tighten the wheel of the release mechanism (2)
(Please note that you may not need to slide the rail all the way
into the pathway – make sure that the distance between the
bi-ocular eyecups (5) and your eyes is comfortable – if it is not,
loosen the release system wheel and while pressing the release
button, slide the unit inward or outward until your eyes are
comfortably positioned next to the eyecups)
3. When goggles are not needed, you may conveniently
flip-up the entire binocular by pressing the flip-up
button (3) with your index or large finger while grasping
onto the body of the bi-ocular with the rest of the hand
and pulling the body upwards. Repeat the procedure
in reverse way to flip the bi-ocular down
4. To completely remove the bi-ocular from the head-
mask, loosen the release wheel and while pressing on
the release button, slide the unit outward