Magnum Venus Plastech PATRIOT SS PAT-CCP-LS-0590-SS - Manual (Page 19)

MAGNUM VENUS PLASTECH Patriot SS Chop Check Manual 19
PUMP ASSEMBLY:
7.
Now install the Rod Seal Assemblies (PAT-CCP-0516) into the top of the Outlet
Body (PAT-CCP-0501-SS). The open side (side with o-ring) goes down inside.
8.
Install the Rod Bushing (PAT-CCP-0505) into the Packing Nut (PAT-CCP-0504).
9.
Thread the Packing Nut (PAT-CCP-0504) into the top of the Outlet Body (PAT-CP-
0501-SS).
10. Carefully push the Fluid Rod Assembly (PAT-CCP-0508-SS) into the Rod Seal
Assemblies (PAT-CCP-0516) from the bottom and then up through the Packing Nut
(PAT-CCP-0504)
11. Install the Backup Ring (PAT-CCP-0515) into the top end of the Cylinder (PAT-CCP-
0519-SS).
12. Install the Piston Seal Assembly (PAT-CCP-0514) into the top end of the Cylinder
(PAT-CCP-0519-SS) on top of the Backup Ring. O-ring should be facing up.
13. Install the Piston Bushing (PAT-CCP-0513) into the top of the Cylinder (PAT-CCP-
0519-SS).
Rod Seal Assembly
Rod Bushing
Outlet Body
Packing Nut
Piston Bushing
Piston Seal Assembly
Backup Ring
O-Ring
Cylinder