Magnum Venus Plastech PATRIOT SS PAT-CCP-LS-0590-SS - Manual (Page 20)

MAGNUM VENUS PLASTECH Patriot SS Chop Check Manual 20
14. Apply a light coat of red grease (6706-2-1) onto O-ring (O-E-140) and install onto the
end of the Cylinder (PAT-CCP-0519-SS).
15. Install the Cylinder (PAT-CCP-0519-SS) over the Priming Rod and into the Outlet
Body (PAT-CCP-0501-SS).
16. Install the Valve Stop (PAT-CCP-0530) over the Priming Rod (PAT-CCP-0527-SS)
into the end of the Cylinder (PAT-CCP-0519-SS)
17. Install the Spacer (PAT-CCP-0529-SS) into the end of the Cylinder (PAT-CCP-0519-
SS) on top of the Valve Stop.
18. Install the Foot Valve Seals (PAT-CCP-0536) into the Intake Valve (PAT-CCP-0531-
SS) o-ring side facing up.
19. Install the Intake Bushing (PAT-CCP-0533) into the Valve Nut (PAT-CCP-0532).
20. Thread the Valve Nut (PAT-CCP-0532) into the Intake Valve (PAT-CCP-0531-SS).
21. Use a threading motion to slide the Intake Valve assembly (PAT-CCP-0531-SS)
onto the Priming Rod (PAT-CCP-0527-SS).
Valve Stop
Intake Valve Assy.
Spacer
Cylinder
Spacer
O-Ring
Foot Valve Seals
Intake Bushing
Valve Nut
Intake Valve