Magnum Venus Plastech INNOVATOR MEGAJECT 5000 (8001) - Manual (Page 26)

MAGNUM VENUS PLASTECH Innovator Megaject Manual 26
Figure 5.1 – Box lid internals
Figure 5.2 – Box base internals
NOTE: ALWAYS ENSURE THAT THE TUBE LOOMS THAT ARE RUN FROM THE
BASE OF THE BOX TO THE LID, ARE NOT KINKED AND POSITIONED
CORRECTLY TO THE SIDES OF THE ENCLOSURE WHEN THE LID IS CLOSED.
Control circuit pressure regulator Valve plate sub-assembly
RGA sub-assembly
PDC
Pump regulator sub-assembly
E-Stop sub-assembly